spSlab v5.50 (24-Month License) (English)

spSlab v5.50 (24-Month License) (English)
Manufacturer
STRUCTUREPOINT
Platforms
Windows
Delivery Type
Download
MSRP:$2,519.93
$46.26 AUD
You save $2,473.67 (98%)

Powered by the Equivalent Frame Method of analysis and design per latest American (ACI 318-14) and Canadian (CSA A23.3-14), spSlab v5.50 is widely used for analysis, design, and investigation of two-way slab systems (including waffle and slab bands), beams, and one-way slab systems (including standard and wide module joist systems).

spSlab, formerly pcaSlab and ADOSS, is used for new designs or investigation of existing structural members subject to flexure, shear, and torsion (equilibrium, or compatibility). With capacity to integrate up to 20 spans and two cantilevers of a wide variety of floor system types, spSlab is equipped to provide cost-effective, accurate, and fast solutions to engineering challenges. spSlab calculates one-way (beam) and two-way (punching) shear around columns and drop panels, immediate and long term deflection.

Using the moment redistribution feature reduces negative moments by up to 20% and reduces reinforcement congestions over the supports to ultimately save in both material and labor.

spSlab also incorporates torsion into shear design and investigation of beam systems. Shear capacity including torsion is represented in terms of required and provided area of transverse and longitudinal reinforcement.

Technical Features

  • Support for ACI 318-14/11/08/05/02/99 & CSA A23.3-14/04/94 design standards
  • Design and investigation of beams, one and two-way slabs including one-way joist systems (standard and wide module) and two-way joist systems (waffle slabs)
  • Slab band system design and investigation for CSA A23.3-14/04
  • Flexure and shear design and investigation with live load reduction and patterning
  • Torsion design and investigation for beams/one-way slab systems
  • Longitudinal reinforcement for combined flexure, shear, and torsion per CSA A23.3-14/04
  • Automatic or manual moment distribution factors and strip widths
  • Moment redistribution for beams/one-way slab systems
  • Calculation of instantaneous deflections at three load levels; dead load, dead load plus sustained live load, and dead load plus live load
  • Calculation of incremental long-term deflections
  • Instantaneous and long-term design strip deflections for two-way systems
  • Analytical modeling of variable support stiffness in systems with rectangular, and circular supports
  • One and two-way (punching) shear investigation considering the effects of drop panels, column capitals, longitudinal beams, transverse beams, and slab bands.
  • Boundary conditions including vertical and rotational springs
  • Top and bottom bar details including development lengths and material quantities
  • Specialty design requirements including crack control, integrity reinforcing, and corner column checking
  • Frame solution results including tabulated column axial forces and moments
  • Mixed span types within one-way or two-way systems
  • Auto-input wizard with instantaneous data checking
  • Graphical display of geometry, loads, and results
  • Advanced view, print, display settings and options
  • Customizable detailed results report
  • spResults module for viewing and exporting input and output data
  • spReporter module for generating, viewing, exporting, and printing reports
  • Import input data from ADOSS v6.0x/7.0x, PCA-Beam, and pcaSlab
  • Detailed manual and online help

Program Features

  • Integrate up to 20 spans and two cantilevers of multiple floor system types in each model
  • 6 load cases
  • 50 load combinations
  • 999 partial dead loads per case
  • 999 partial live loads per case
  • 2 top bar layers (Design mode)
  • 2 bottom bar layers (Design mode)
  • 15 bar sets per span
  • Add and remove self weight from both ultimate and service load combinations
  • Dislay loads and geometry graphically as they are input
  • Import input data from ADOSS v6.0x/7.0x and pcaBeam v1.0x
  • Customizable results report

General Features

  • English (in.-lb) or SI (metric) units
  • Online help
  • Auto-input wizard with instantaneous data checking
  • User-controlled screen color settings
  • Ability to save defaults and settings for future input sessions

New Features:

  1. Introduced new spReporter module for generating, viewing, exporting, and printing reports
  2. Introduced new spResults module for viewing and exporting input and output data
  3. Added independent font options for printed outputs
  4. Added support for ACI 318-14 design standard
  5. Added support for CSA A23.3-14 design standard

New Features:

  1. Provided additional web-based resources and online help options in the help menu and disabled all options related to context help
  2. Optimized the diagram in print preview to cover maximum available space in the paper for clarity in printing

spSlab v5.50


Windows Vista SP2 or later with 32 or 64 bit architecture

Mac OS : Using a Virtual Machine running Windows with the specs mentioned above.

Loading... Loading...